Audio-Technica AT-LPW50PB Fully Manual Belt-Drive Turntable

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

FEATURES

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM.
  
  
• The motor features a speed-sensor system to maintain accurate platter rotation speed.
  
  
• Adjustable dynamic anti-skate control.
  
  
• Professional anti-resonance, die-cast aluminium platter with rubber mat.
  
  
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus.
  
  
• AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
  
  
• Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest.
  
  
• Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with a high-gloss, piano-black finish.
  
  
• High-isolation, height-adjustable feet.
  
  
• Built-in switchable phono preamplifier for phono or line-level output.
  
  
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain.
  
  
• Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover.

• Type: Belt-drive manual turntable
• Motor: DC servo with Active Speed Stabilisation
• Drive Method: Belt drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Die-cast aluminium
• Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio: >60dB
• Output Level: Pre-amp "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec , Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalised
• Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max.
• Dimensions: With dustcover: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 126.0 mm (4.96") H / Without dustcover and hinges: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 114.0 mm (4.49") H
• Weight: 5.56 kg (12.26 lbs.) without dust cover

• 1 x Dust cover, Platter, Turntable mat
• 1 x Drive belt, Counterweight, AT-HS4 headshell
• 1 x AT-VM95E stereo cartridge (black)
• 1 x 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3'))
• 1 x AC adapter (approx. 1.5 m (4.9'))
• 1 x Dust cover hinges